SKAR AUDIO DUAL 12" 2400W SDR COMPLETE BASS PKG LOADED SUB BOX - AMP - WIRE KIT

Description

Product Description
Skar Audio created this custom loaded enclosure package to deliver powerful, deep, and tight bass in an all-in-one competition-grade system. This package features two, 12-inch, dual 4-ohm, Skar Audio SDR Series subwoofers, which are pre-loaded and wired up inside of a custom dual 12" ported enclosure. Next, we pair the loaded enclosure of this package with the Skar Audio RP-1200.1D Class D mono-block amplifier, the perfect amplifier to power your new system and matched for perfect compatibility and power handling with the included subwoofers. Finally, we include a premium Skar Audio 4 Gauge OFC premium amplifier wiring kit to install your new system, making installation hassle free.
The Skar Audio SDR series of subwoofers were designed to deliver hard hitting, low spectrum sound. Featuring a high flux ferrite motor, these versatile 12-inch woofers are conservatively rated at 1,200 watts max power each. When looking for a system that delivers low end frequencies with authority, look no further. This is the perfect solution for a daily driver that can handle whatever is thrown at it, offering unmatched reliability and sound quality. The enclosure housing the subwoofers features a unique kerf middle port and split chamber woofer design, allowing for extreme levels of bass output. Furthermore, the enclosure is finished in premium grade black carpet for a sleek appearance and features the Skar Audio logo in white on the top surface of the box.
This package was put together by our installation experts to ensure compatibility and allow for an easy installation. We take the guess work out of pairing the components of your system up, and make it easy to get the bass you've always wanted in your ride.
This Package Includes The Following Items
1x Skar Audio
SDR-2X12D4
Dual 12" SDR Series 2,400 Watt Max Power Loaded Ported Subwoofer Enclosure
1x Skar Audio
RP-1200.1D
Monoblock 1200 Watt Class D Subwoofer Amplifier
1x Skar Audio
SKAR4ANL-OFC
4 Gauge OFC Complete Amplifier Wiring Kit with 120 Amp ANL Fuse Included
Compatible with The Following Vehicles
Universal Fit - Check Enclosure Dimensions to Ensure a Proper Fit
*The dual 4 ohm subwoofers included in this package are pre-wired and loaded into the subwoofer enclosure at a 1-ohm final load to ensure an easy and hassle free installation when paired with the included amplifier.
Skar Audio SDR-12 D4 Subwoofer Specifications
Includes (2) Subwoofers Pre-Loaded Into Subwoofer Enclosure
Skar Audio SDR-12 D4 - 12" Dual 4 Ohm Subwoofers
Coil Configuration: Dual 4 Ohm
Peak Power: 2,400 Watts (pair) | 1,200 Watts (each)
RMS Power: 1,200 Watts (pair) | 600 Watts (each)
Frequency Response: 22 - 300 Hz
2.5" High Temperature Copper Voice Coil
Competition Grade Pressed Paper Cone
High Roll Foam Surround
Advanced Airflow Cooling Design
Motor Weight: 97 Oz
Sensitivity (spl): 84.7 dB
Fs: 32 Hz
Bl: 10.45 n/a
Qts: 0.50
Qes: 0.57
Qms: 4.21
Cms: 0.13 mm/N
Vas: 43.4 L
Xmax: 13.5 mm (one-way)
Skar Audio RP-1200.1D Amplifier Specifications
Skar Audio RP-1200.1D Class D Monoblock Car Subwoofer Amplifier
4 Way Protection Circuitry: Thermal, Voltage, Speaker, DC
Max Power at 1 Ohms: 1,600 Watts x 1 Channel (14.4v)
RMS Power at 1 Ohms: 1,200 Watts x 1 Channel (14.4v)
RMS Power at 2 Ohm: 800 Watts x 1 Channel (14.4v)
RMS Power at 4 Ohms: 500 Watts x 1 Channel (14.4v)
MOSFET Power Supply
Soft Turn on Circuit
Tri-Mode Capable / Bridgeable
Frequency Response: 20 Hz ~ 250 Hz
Signal to Noise Ratio: 85 dB
Damping Factor: 200<
Low Pass Filter (Variable): 50 Hz ~ 220 Hz
Subsonic Filter: 0 ~ 50 Hz
Remote Bass Knob & Wire Included
4 Gauge Power and Ground Terminals
Working Voltage: 8.5V - 14.4V
Fuse Rating: 100 Amp
Dimensions: 11.875" (Length) x 6.1875" (Width) x 2.25" (Height)
Dual 12" Ported Enclosure Specifications
Dual 12-Inch Vented (Ported) Subwoofer Enclosure
Custom Engineered Skar Audio Enclosure specifically Designed for use with the Skar Audio SDR-12 D4 (x2) Subwoofers
"Wedge" Style Enclosure with Vented Design allows for Extreme Low End Bass Output Levels and Responsiveness
Wood Thickness & Material: 5/8" MDF
Front Baffle Thickness: 1.25"
(Double Baffle - Countersunk Design for a Smooth, Flush, Subwoofer Appearance)
Finish: Black Colored Carpet with Skar Audio logo in White on Top of Enclosure
Premium Push Terminals Located on Left Side of Enclosure (one terminal cup only - woofers are wired internally to reach a 1-ohm final load)
Internal Air Space of Enclosure: 4.00 ft³
Tuning Frequency of Enclosure: 32 Hz
Box Outer Dimensions:
Width: 37.875"
Depth #1: 16.75" (Top Depth)
Depth #2: 18.75" (Bottom Depth)
Height: 14.25"
Skar Audio SKAR4ANL-OFC 4 Gauge OFC Amplifier Wiring Kit Specifications
Skar Audio Model: SKAR4ANL-OFC
4 Gauge Complete OFC Amplifier Installation Kit with ANL Style In-Line Fuse Holder
Everything You Need to Install & Wire Up Your Amplifier
Premium 4 Gauge Oxygen Free Copper (OFC) Wire for Maximum Current/Power Transfer
17 ft. of 4 AWG OFC Matte Blue Ultra Flexible Power Cable
3 ft. of 4 AWG OFC Matte White Ultra Flexible Ground Cable
16 ft. of Blue Remote Turn-on Wire
17 ft RCA 2-Channel Blue Twisted Pair Shielded Interconnect Cable
20 ft. of 16 Gauge Matte Blue Ultra Flexible Speaker Wire
High Current ANL Style Fuse Holder
120 Amp ANL Fuse Included
3 Ft Black Flex Wire Loom
Ring Terminals
Ground Terminals
Vinyl Cable Ties Included