-40%
Open Xenium for original XBox

Open Xenium for original XBox

$ 15.83

Availability: 100 in stock
  • All returns accepted: ReturnsNotAccepted
  • Compatible Model: For Microsoft Xbox
  • Type: Internal
  • Brand: Team-Donkey
  • Condition: New

    Description

    Open Xenium for original XBox
    Open Xenium is an open source project for the original XBox.
    What is included:
    Open Xenium - fully assembled, tested, and programmed. (does not contain any copyrighted software)
    2x7 Pin header
    LPC rebuild PCB for v1.6 consoles
    A card will also be included with your order providing information on where to find install guides/manuals.
    Notice:
    The LPC PCB is shipped the way we receive it from the PCB house,
    you will need to inspect and clean and material from it that could cause
    it to not function properly before installing it.
    Open Xenium work with all revisions of the original XBox and has the following features
    Software controlled BIOS bank switching (any BIOS combinations that fit into 1mbyte of flash memory (4x256k, 1x512+2x256k, 2x512k, 1x1mbyte).
    Instant boot to a chosen BIOS using the power button.
    Boot the XeniumOS with eject button.
    Ability to boot from the onboard BIOS (colloquially known as TSOP booting). This will completely disable OpenXenium and release D0/LFRAME(1.6) to boot the Xbox as if stock.
    All the standard features in XeniumOS. (EEPROM tools, Hard drive tools, FTP/SMB Server etc.).
    Three general purpose outputs. These are normally bitbanged as a SPI master (MOSI,CLK,CS) with the most common use an LCD, however could support any SPI peripheral in theory.
    Two general purpose inputs. On a Xenium, these are I believe intended to be MISO lines to complement the SPI interface but could be used for any 3.3V digital logic.
    Three outputs are connected to an RGB led (Or an external user added RGB led).
    Reserved memory on the flash chip for non-volatile storage of an EEPROM backup and XeniumOS settings.
    If you bridge the two recovery pins on power up, it will attempt to boot the XeniumOS recovery BIOS if available. This functions the same as a genuine Xenium modchip.
    The author of the Open Xenium project has given us permission to manufacture and distribute this product.
    Information for the project can be obtained by requesting contacting us.
    The LPC PCB is also an open source project, information on that project can also be obtained by contacting us.
    Shipping is US only due to new tax laws enacted this year. We do not ship outside of the US.