Hunter Geniune Replacement Handheld Ceiling Fan Remote Control Black K5579-01

Description

Genuine Original Hunter Replacement "Simple Connect" Remote Control #K5579-01
For Hunter Ceiling Fans
This is a direct replacement for remote #s:  K5579-01
Wireless receiver not included
Requires 3V
CR2032 Battery (included)
Part #K5579-01
FCC ID:  IN2TX45
FREQ:  434 MHz
Part #K5579
must match for compatibility.  Please inquire if you're not sure.
Pairing Instructions:
Note: The remote must be paired before the fan will operate.
Open the battery compartment and install the battery.
Turn off the breaker that powers the fan.  Leave power off for 1 minute and then turn back on.
Within 3 minutes, press the pair button on the remote (inside the battery compartment). If pairing was successful, a single beep will sound. Replace the battery door and Phillips head screw.
If it does not beep, turn off power to your fan, wait 1 minute then try again. If using the transmitter with multiple fans, repeat this process for each fan.
If fan is a pull-chain model, please make sure that pull-chain control is set to High speed for remote to work correctly.