Fits: Chrysler / Dodge Challenger 2008-2021 Willpak Aluminum Rear Window Louver

Description

Aluminum Rear Window Louver
2008- 2021 Challenger
By Willpak
Add the distinctive performance look to the rear window of your ride with an Astra/Hammond Aluminum Rear Window
Louver
Rear window louvers were all the rage in the muscle car scene of the 60s, 70s, 80s, and now you can have the same styling for today's performance coupes and sedans. They will visually enhance the performance look of your car while increasing privacy and minimizing interior temperature.
Reduce your interior temperature
Easy installation-
NO DRILLING REQUIRED!
Hardware and instructions are included
Made from lightweight aluminum
Adds protection from UV Rays
Reduce upholstery damage from the suns rays
High grade black finish
90 day limited warranty
Maintain excellent rear visibility
Requires assembly
Willpak Authorized Dealer
Product Warranty
90-day Limited Warranty. Willpak Industries Inc. warrants to the original purchaser of any Astra/Hammond products (herein referred to as Products) that such Products will be free, under normal use and service, from defects in material and workmanship for a period of 90 days from the date of delivery of such Products to the original purchaser.
Please allow up to 10-12 days shipping as all products are shipped from Canada
Frequently Asked Questions (FAQs)
Q: Why wait 24 hours before I install the Rear Window Louver?
A: It’s important to wait the full 24 hours before installing the louver to the stainless mounting plates. This is to achieve maximum adhesion of the mounting brackets; the 3M adhesive needs time to set-up or “Cure”. While the brackets may feel solidly attached after applying to the glass, they needs that 24 hours to ensure the bracket will come loose when the car is driven. It’s also important, make sure that the exposed side of the 3M adhesive is not touched or contaminated before applying to the glass to achieve maximum adhesion.
Q: Why the multiple strips of 3M automotive-grade adhesive tape on the back of the mounting brackets?
A: This is to ensure that air-pockets do not develop under the adhesive; the strips allow for any air that could be trapped to escape via the gaps between the strips. Maximum pressure applied to the top of the bracket will make for a good contact. Apply a small amount silicone adhesive around the bracket, as instructed.
Q: Why the silicone adhesive around the brackets?
A: This will ensure that moisture will not “undercut” the 3M automotive-grade adhesive over time. The best procedure is to mask off the glass area around the bracket, leaving about a 3/8” of glass visible. Apply a thin bead of clear silicone to all the edges of the stainless mounting plate and press in with your finger to seal all edges.
Q: Why is my Astra/Hammond Rear Window Louver not hinged?
A: Some of our more recent Rear Window Louvers are not hinged; most of customers preferred the tighter and more custom fit to the rear glass; and, they say that it’s not that difficult to remove and replace, if needed.
Q: How to I clean the glass once I have mounted the Rear Window Louver?
A: The louver can be removed by unscrewing the black thumbscrews and removing the small stainless washers. No tools should be required for this step. While the louver is fairly light in weight; you will still need to be very careful, as it is flexible and you want to avoid having it make contact with any painted surface of your vehicle. The removal and replacement of the Rear Window Louver may only take a matter of minutes. Believe it or not, you will have to clean the rear window “LESS” with an Astra/Hammond louver; since, the sunlight does not shine directly on the rear glass-there is no glare. Minor dust and water spots are not really visible where there is no glare from the glass. In many cases, just washing the louvers and between the louvers with clean water will keep the rear glass clear and clean.
Q: Can I paint the Rear Window Louver?
A: Yes. All three types of Astra/Hammond Rear Window Louvers: Aluminum, Textured ABS and Smooth ABS can be painted. The Smooth ABS is the only Astra/Hammond Rear Window Louver that is designed and required to be paint. Astra/Hammond Rear Window Louvers are available painted from the Manufacturer.
Thanks for looking