Coin acceptor G-13mft CCTALK , fluid resistance, vending, side

Description

Fluid resistance.
As part of the overhaul, the PCB (printed circuit board) was dismantled and sprayed with a special insulating varnish resistant to aggressive liquids, which prevents damage to the PCB by oxidation after the ingress of unknown liquids and ensures a long-term increase in reliability and service life of the validator in humid environments.
I offer G-13mft coin acceptor/ coin validator / coin mech type Vending with CCTALK communication port and with six outputs for sorting direction of valid coins by solenoids.
Validator have a with a side input for coins - type F1 front panel.
Here's how it works - illustration video:
https://www.youtube.com/watch?v=bY-pPamTflI
You can find a suitable type of front panel F1 for mounting in the master machine e.g. here:
https://www.geldbearbeitung.at/en/Accept-verify/Coin-Mechanisms/Assembly-Frontplates/Frontplates-electronic-Validator/front-plate-f1-for-electronic-coinvalidator-rm5f.html
or here:
https://www.sparetech.eu/mini-front-plate-f1-blue-c2x27386122
Since I found out that most people interested in buying a validator do not have a clear idea of ​​what type of validator they need as a replacement for their own defective piece or for building own project, so I'll specify.
G-13mft is a model family, which is produced in many variants differing from each other in the way of communication with the master-superior machine (vending machine, slot machine, etc.).
So before ordering, I recommend sending photos of your type that you want to replace to assess whether it is compatible with my offer and what are the type converting and programming options.
In addition to the variants of vending and casino and different types of communication, we must distinguish the method of programming specifics of the communications and currency type.
The validators that I offer (Vending CCTALK with 6 output for sorting valid coins to hoppers or without this function) can be programmed for any coin or token, but that's not all you need to know for validator to work properly for you.
It is about:
- supply voltage level, default is 10 - 27V DC
-
admission the coin from the side - for type F1 on the front panel.
- number of CCTALK communication adress and channels, default settings is standard adress no. 2 and datablock 34009044.
- The number of coin routers-sorters and number of outputs for solenoids for this purposse used if you use them.
- The type of currency and which coins are assigned to which CCTALK communication channel. Default is GBP in block 0 or € in block 1 in the following order:
Channel 1 = GBP 0,01 , 0,01N in block 0 or € 0,01in block 1 sorten path 3
Channel 2 = GBP 0,02 , 0,02N in block 0 or € 0,02 in block 1 sorten path 1
Channel 3 = GBP 0,05 , 0,05N2 in block 0 or € 0,05 in block 1 sorten path 1
Channel 4 = GBP 0,10 , 0,10N2 in block 0 or € 0,10 in block 1 sorten path 1
Channel 5 = GBP 0,20 in block 0 or € 0,20 in block 1 sorten path 1
Channel 6 = GBP 0,50 in block 0 or € 0,50 in block 1 sorten path 1
Channel 7 = GBP 1,00 in block 0 or € 1,00 in block 1 sorten path 2
Channel 8 = GBP 2,00 in block 0 or € 2,00 in block 1 sorten path 1
CCTALK adress standard (2)
So if you want other currency, or combination two or three different currencies, or metal token programming, or any memorial coin and also you want other settings of channels of each channel or channel combination, please contact me.
I need to know what you want, because telepathic transmission is not my strong point :)
If I do not receive any additional information after your order, then the type with the default setting for GBP and € and the power supply range of 10-27VDC, standard adress (No2) for CCTALK, datablock 34009044 will be sent automatically.
If you need to programming validators yourself, you can purchase the device for this purpose here:
https://www.ebay.com/itm/174431539976
The price of this validator is also with programming of custom channel configuration or with the original data blocks (originally programmed coins from factory) by order
requirment and agrement.
I have practical experience with repairing, diagnosing and programming any defects of G-13mft coins validator since 2007, so thousands of pieces have already passed through my hands.
During this work, I successfully and reliably removed all defects without complaint.
Shipment is as package with tracking number.